Camera Gauge

Overview

Gauge Icon Camera Gauges are used to show the video feed from an attached camera on the display.

If no camera is connected, a standard colour bar test card is shown.

Properties

In addition to Standard Gauge Properties , the following properties may be configured:

Property Description
Mirror Image from Camera If checked, the feed from the camera will be reversed as if seen in a mirror. This is useful when a non-mirrored camera is used as a rear view camera.
Display Mode Sets the display mode of the image. This can be one of three modes:
  • Preserve Aspect Ratio - The width and height of the gauge will be adjusted such that the aspect ratio (width / height) of the original camera source is preserved.
  • Crop - Allows any gauge size to be set. Because the aspect ratio of the camera is fixed, depending on the size of the gauge, some of the vertical or horizontal image will be cropped from the camera.
  • Scale - Allows any gauge size to be set. The image from the camera will be scaled in both width and height to fit the gauge size without cropping. The image may be distorted as a result.
Left Crop Number of pixels to crop from left.
Top Crop Number of pixels to crop from top.
Right Crop Number of pixels to crop from right.
Bottom Crop Number of pixels to crop from bottom.

Display Support

DisplaySupported?
CD34 No
LDS4 No
CD32 Yes
LDS35 No
LDS35_L No
CD6-43 No
GLW-43 No
LFRW-43 No
ZDU-L No
ZDU-P No