Shape Gauge
Overview
The Shape Gauge draws shapes on the screen. It has no main value input, but its colour can change when a colour source or warning is configured on supported displays.
Properties
In addition to Standard Gauge Properties , the following properties may be configured:
| Property | Description |
|---|---|
| Shape | Choose Rectangle, Ellipse, Rounded Rectangle or, on supported displays, Marker. |
| Corner Radius | Radius of the corners of a rounded rectangle, in pixels. |
| Arrow Aspect Ratio | (Marker) Ratio of arrow length to width. |
| Shape Width % | (Marker) Percentage of the computed shape length used for its width. |
| Angle [degrees] | Rotates the shape on supported displays. |
| Thickness | Thickness of the border drawn around the shape. |
An optional gradient fill can be set instead of a solid fill colour:
| Property | Description |
|---|---|
| Enable Gradient | Check to enable the gradient fill. |
| Direction | Horizontal draws the gradient from left to right, Vertical draws the gradient from top to bottom. |
| Start Colour | The colour at the start of the gradient. |
| End Colour | The colour at the end of the gradient. |
Display Support
| Display | Supported? |
|---|---|
| CD34 | Yes |
| LDS4 | Yes |
| CD32 | Yes |
| LDS35 | Yes |
| LDS35_L | Yes |
| CD6 | Yes |
| GLW-43 | Yes |
| LFRW-43 | Yes |
| ZDU-L | Yes |
| ZDU-P | Yes |