Menu Gauge
Overview
The Menu Gauge allows a simple text menu to be drawn on the screen which allows navigation to various pages in the setup.
This is useful for seldom used configuration options such as Setting the time, setting the calibration factor or displaying the screen properties.
The menu events Menu Up and Menu Down are used to navigate up and down the menu and Menu Select jumps to the page associated with the current menu item.
Properties
In addition to Standard Gauge Properties , the following properties may be configured:
| Property | Description |
|---|---|
| Selected | Colour of the selected menu item. |
| Line Spacing | Spacing between lines in the menu. |
| Items | The items to display in the menu and the pages they switch to. Each item has a text and page. |
Menu Events
| Property | Description |
|---|---|
| Up | Move the cursor up. Applies to all menu gauges. |
| Down | Move the cursor down. Applies to all menu gauges. |
| Select | Select the current item. |
These events are available when a menu control output is assigned.
Menu Items
The menu item editor has two columns:
| Column | Description |
|---|---|
| Menu Item | The text shown for the menu item. |
| Page | The page to switch to when the item is selected. |
Display Support
| Display | Supported? |
|---|---|
| CD34 | Yes |
| LDS4 | Yes |
| CD32 | Yes |
| LDS35 | Yes |
| LDS35_L | Yes |
| CD6 | Yes |
| GLW-43 | Yes |
| LFRW-43 | Yes |
| ZDU-L | Yes |
| ZDU-P | Yes |