Limiter Gauge
Overview
The Limiter Gauge is typically used to signal an approaching rev limit by means of several boxes that change colour as the rev limit approaches.
Properties
In addition to Standard Gauge Properties , the following properties may be configured:
| Property | Description |
|---|---|
| Box Count | The number of boxes in the gauge. |
| Box Size | The width and height of the box in pixels. |
| Limiter Start | The value at which the first box will change colour from Background Colour to Fill Colour. |
| Limiter Offset | The value added to the Limiter Start to determine when the next box changes colour. |
| Draw Circular Limit Lights | If checked, round LED style boxes will be drawn instead of boxes. |
For example, if Box Count is 3, Limiter Start is 8000 and Limiter Offset is 200, the first box will change colour at 8000, the second at 8200 and the third at 8400.
Display Support
| Display | Supported? |
|---|---|
| CD34 | Yes |
| LDS4 | Yes |
| CD32 | Yes |
| LDS35 | Yes |
| LDS35_L | Yes |
| CD6-43 | Yes |
| GLW-43 | Yes |