Arc Gauge
Overview
The Arc Gauge renders a swept arc (annulus). As with Needle Gauge
, the arc gauge can specify a background image.
Note
The arc gauge may require a firmware update to be supported on your display.
Properties
In addition to Standard Gauge Properties , the following properties may be configured:
| Property | Description |
|---|---|
| Type | The type of gauge to be drawn, may be switched between Needle Gauge or Arc Gauge . |
| Background Image | The image behind the arc. Clearing it removes the image. |
| Angle [degrees] | Rotates the gauge by the specified angle. |
| Auto-size | Automatically calculate the radii and centre of the arc from the gauge width and height. |
| X Centre, Y Centre | Horizontal and vertical position of the arc centre, in pixels. |
| Outer Radius | Distance from the centre to the outer edge of the arc, in pixels. |
| Inner Radius | Distance from the centre to the inner edge of the arc, in pixels. |
| Thickness | Thickness of the arc stroke in pixels (Outer Radius minus Inner Radius). |
| Start Degrees | The number of degrees from 6 o’clock (the zero degree position) that the starting value of the gauge should be drawn. |
| End Degrees | The number of degrees from 6 o’clock (the zero degree position) that the end value of the gauge should be drawn. |
| Transparent Mask | Chroma-key colour in the background image to omit when masking is enabled. |
| Enable Transparent Mask | Omit pixels matching Transparent Mask from the background image. |
Display Support
| Display | Supported? |
|---|---|
| CD34 | No |
| LDS4 | Yes |
| CD32 | No |
| LDS35 | No |
| LDS35_L | No |
| CD6 | Yes |
| GLW-43 | Yes |
| LFRW-43 | Yes |
| ZDU-L | No |
| ZDU-P | No |