Value Gauge

Overview

Gauge Icon The Value Gauge shows the value of the output specified in the Input property according to the format specified in the Format property. The Justification property specifies whether the text is aligned to the left, right or centre of the bounding rectangle.

Warning

It is important to select the background colour of the value gauge to be the same as the colour of the background the gauge is over. Failure to do so may result in corruption of the value displayed.

The value gauge has an optional warning mode that changes the colour of the gauge when a warning limit for the input is exceeded or if a secondary channel is logically ’true'.

Properties

The Value Gauge uses the shared properties described in Standard Gauge Properties .

The following colour-mode controls are available where supported:

Property Description
Colour Mode Selects how the gauge colour responds to its input or a separate colour input.
Alarm Limit In limit mode, the input value must exceed this limit to activate the alarm colour.
Alarm Colour Colour used while the alarm is active.
Alarm Flash Makes the gauge flash while the alarm is active.
Colour Input In logic mode, a non-zero value activates the alarm. In direct-colour mode, supplies the colour value.
Colour Map In direct-colour mode, maps the colour input value to a colour.
Colour Preview A design-time colour input value used to preview the selected colour mode.

Special Formats

The Special Format property can be used to display internal system values. See Value Formatting .

The Channel Name and Channel Units Special Format values will cause Dash Design to replace the value gauge with a Text Input Gauge when programming the display containing the input channel name or units. This can be useful if creating Gauge Groups where the channel name, value and units should be shown; setting the Input channel property on the group will assign the value and also update the channel name and units.

Display Support

DisplaySupported?
CD34 Yes
LDS4 Yes
CD32 Yes
LDS35 Yes
LDS35_L Yes
CD6 Yes
GLW-43 Yes
LFRW-43 Yes
ZDU-L Yes
ZDU-P Yes