Internal and Diagnostic Channels
Overview
Depending upon the display type and firmware version, additional predefined channels provide information from inside the Display Module. The available channels and their names vary between display types; check the predefined channels in your setup (see Channels Tab ).
| Category | Examples | Description |
|---|---|---|
| Internal supplies and temperatures | Internal 1V8, Internal 3V3, Internal 5V0, Supply Volts, Internal Temperature, CPU Temperature | Internal voltage rails, the supply voltage and internal temperatures, scaled in physical units. |
| Sensors | Ambient Light Sensor, Sensor Supply 5V | Built-in sensors and the sensor supply voltage, where fitted. |
| Inertial measurement | Accel X/Y/Z, Gyro X/Y/Z | Accelerometer and gyroscope readings, where fitted. |
| Buttons | Button 1, Button L1, Paddle L, Button SWT1 | The state of buttons on the display or steering wheel. Buttons may also be used to trigger events; see Events Tab . |
| Marshalling LEDs | Marshall Amber L, Marshall LED Logic Red R | The state of the marshalling LEDs. |
| Diagnostics | Millisecond Counter | Timing diagnostics, where supported by the display firmware. |
Channels that require a particular firmware version are checked when programming the display; see Uploading a Setup to a Display .