ECU Menu

  • Connection Setup...
    Setup ECU connection preferences / settings.
    id: actions/setupConnection
  • ConnectShift+F7
    Connect to the ECU.
    id: actions/connect
  • Disconnect
    Disconnect from the ECU.
    id: actions/disconnect
  • Send Calibration to ECU...
    Transfer a new calibration from the PC to the ECU.
    id: actions/sendCalibration
  • Send Current Calibration
    Transfer the currently open calibration from the PC to the ECU.
    id: actions/sendCurrentCalibration
  • Read Calibration
    Transfer all calibration data from the ECU ito the PC.
    id: actions/receiveCalibration
  • Verify Calibration...
    Verify that the calibration data on the PC matches that in the ECU.
    id: actions/verifyCalibration
  • Program Firmware...
    Program new firmware into the ECU.
    id: actions/programFirmware
  • Store Changes in ECUCtrl+K
    Programs the checksum in the ECU and causes calibration data to be stored in non-volatile memory (saved on ECU).
    id: actions/ecuStoreChanges
  • Auto Store
    Enables / Disables Auto Store in the ECU.
    id: actions/autoStore
  • Reset RTC to Current Time
    Reset the ECU Real Time Clock to the current time.
    id: actions/resetRTC
  • Clear Calibration
    Clear the calibration in the ECU.
    id: actions/clearCalibration
  • Live Trim ControlCtrl+T
    Display the Live Trim Control window (formerly known as 'Virtual PotBox').
    id: actions/liveTrimControl
  • ECU Simulator
    The ECU simulator is used for comms protocol emulation.
    id: actions/ecuSimulator
  • Ethernet ECU Simulator
    The Ethernet ECU simulator is used for comms protocol emulation.
    id: actions/ethernetEcuSimulator
  • Security
    • Set Password...
      Set the ECU password to protect the calibration data.
      id: actions/setPassword
    • Clear Password...
      Clears the ECU password - this will also clear any calibration data in the unit unless it was unlocked.
      id: actions/clearPassword
    • Reset Default Password
      Resets the default ECU password. The default password is automatically tried when connecting to the ECU to avoid re-typing it.
      id: actions/resetDefaultPassword
  • Installations...
    Show ECU installations / install an ECU definition file.
    id: actions/installEcu
  • ECU Definition Extensions...
    Import / manage ECU Definition extensions that augment ECU features (e.g. pinouts / wire colours etc).
    id: actions/manageEcudefExtensions
  • ECU Information
    Display ECU information.
    id: actions/ecuInfo
  • Engine History Log...
    Engine History Log Access.
    id: actions/engineHistoryLog
  • Ethernet Diagnostics...
    Inspect the ethernet configuration on this PC and check if any ECU detection broadcasts have been received.
    id: actions/ethernetDiagnostics