ECU

Overview

ECUs can be monitored and calibrated in real-time by connecting the ECU to the PC.

GWv4 supports both GEMS ECUs and ASAM Standard XCP based ECUs on a variety of transport layers including RS232, USB, CAN and Ethernet.

This chapter details the ECU connection process.

Please be aware that GEMS has two types of ECU, a standard, and a Simulink/Matlab enabled ECU (the EM80-M). Some of the processes for the EM80-M are slightly different, and you will find these details highlighted in the relevant places, e.g. ECU Internal Logging and EM80-M Internal logging have separate sections in this manual.

• ECU Definition Files
• ECU Connection
• ECU Definition Extension Files
• Connection Settings
• Connection Troubleshooting
• Baud Rates
• Programing/Upgrading ECU Firmware