Needle Gauge

Overview

Gauge Icon The Needle Gauge allows a scaled pointer or needle to be drawn over a graphic image. This allows much more eye catching graphics to be used for round gauges than could otherwise be drawn dynamically by the display hardware.

Properties

In addition to Standard Gauge Properties , the following properties may be configured:

Property Description
Type The type of gauge to be drawn, may be switched between Needle Gauge or Arc Gauge .
Background Image The image behind the needle. Clearing it removes the image.
Angle [degrees] Rotates the gauge by the specified angle.
Auto-size Automatically calculate the length and centre of the needle from the gauge width and height.
X Centre, Y Centre Horizontal and vertical position of the centre of rotation, in pixels.
Centre Offset Distance from the centre of rotation to where the needle starts, in pixels.
Draw Centre Draw a circle at the base of the needle.
Needle Length Length of the needle, in pixels.
Base Width Width of the base of the needle, in pixels.
Start Degrees The number of degrees from 6 o’clock (the zero degree position) that the starting value of the gauge should be drawn.
End Degrees The number of degrees from 6 o’clock (the zero degree position) that the end value of the gauge should be drawn.
Transparent Mask Chroma-key colour in the background image to omit when masking is enabled.
Enable Transparent Mask Omit pixels matching Transparent Mask from the background image.

Display Support

DisplaySupported?
CD34 Yes
LDS4 Yes
CD32 Yes
LDS35 Yes
LDS35_L Yes
CD6 Yes
GLW-43 Yes
LFRW-43 Yes
ZDU-L Yes
ZDU-P Yes