CONNECTION
Supported by Ginmake 1.33 and later, GIN file version 3.23.
Syntax
[CONNECTION,type[,param1,param2,...]]
Connection definitions give GW a hint as to how the ECU should be connected to. The idea is to be able to provide a better user interface if it appears that the user is having trouble connecting to the ECU. It is mandatory to have at least one connection defined in GIN files of version 3.23 or later.
The connections will be checked when connecting to the ECU in Gwv4. If there is not a connection in the GIN that matches, then GW will warn you.
For now, these are the definable connection types. The third parameter of the COM connection definition is the baud rate (mandatory for COM connections only).
1// [CONNECTION,COM,38400]
2// [CONNECTION,FTDI]
3// [CONNECTION,LIBUSB]
4// [CONNECTION,HID]
5// [CONNECTION,MASS] // Mass storage device
The CONNECTION definition is just a list of strings and there is no checking on the actual values performed by ginmake. This is to make it easily extensible in the future.
Notice that only the COM port connection type requires a baud rate. In the future the other connection objects may acquire additional parameters.