Cross-Hair Gauge
Overview
The Cross Hair Gauge uses two inputs to move a cross hair around a box.
Properties
In addition to Standard Gauge Properties , the following properties may be configured:
| Property | Description |
|---|---|
| Input X, Input Y | Channels used to position the cursor on the X and Y axes. |
| Input Filter X, Input Filter Y | Filters or modifiers applied independently to each axis input. |
| Input Value X, Input Value Y | Design-time preview values for the X and Y axes. |
| Minimum X, Minimum Y | Starting values for the X and Y axes. |
| Maximum X, Maximum Y | End values for the X and Y axes. |
| Size | Size of the cross-hair cursor, in pixels. |
| Shape | Shape of the cross-hair cursor. |
| Thickness | Thickness of the cursor lines, in pixels. |
| Background Image | Image behind the cross hairs, useful for showing the meaning of a position. Clearing it removes the image. |
| Transparent Mask | Chroma-key colour in the background image to omit when masking is enabled. |
| Enable Transparent Mask | Omit pixels matching Transparent Mask from the background image. |
Display Support
| Display | Supported? |
|---|---|
| CD34 | Yes |
| LDS4 | Yes |
| CD32 | Yes |
| LDS35 | Yes |
| LDS35_L | Yes |
| CD6 | Yes |
| GLW-43 | Yes |
| LFRW-43 | Yes |
| ZDU-L | Yes |
| ZDU-P | Yes |