Output Pins

Overview

For many functions, the physical output pins that the function is routed to is user-selectable via ‘Out’ options.

e.g. Out Oil Feed 1 or Out Oil Feed 1 PWM.

Inverting Outputs (Active Low)

Depending upon the electrical characteristics of the output pin, it may be necessary to invert the output signal.

To invert the sense of the output, use a negative value in the calibration for the output pin.

Output Pin Restrictions

Some output pins have different features and restrictions. For example, some pins may be used for PWM outputs, digital outputs, or timed.

Care should be taken to ensure that multiple functions are not assigned to the same output pin as this would cause conflicts and un-defined behaviour.

The correct type of pin should be selected for the function being controlled, for example Out Oil Feed 1 PWM must be a PWM-capable output pin.

Pin Numbering

Refer to the ECU manual for the pin numbering scheme used by the ECU. The internal ECU pin numbering scheme differs to the physical pin numbering on the ECU connector.