Subsections of Commands

Shortcut Keys

Shortcut Action
A Zoom Out (fine)
Alt-L Limits…
Alt-S Smooth…
Alt-T Reset Trails
Alt+Ctrl+L Lock Layout (All Tabs)
Locks the window layout of all tabs.
Alt+Enter Properties
Display the properties panel.
Alt+F6 Add Marker to PC Log
Add a marker to PC Logging if it is running.
Alt+F7 Preferences…
Application preferences / settings.
C Select Column
Select Column
Ctrl-F Function
Ctrl-R Rename…
Ctrl-Shift-A Absolute Change…
Ctrl-Shift-P Percent Change…
Ctrl-Shift-R Show Raw Values
Ctrl+0 View Tab 10
Ctrl+1 View Tab 1
Ctrl+2 View Tab 2
Ctrl+3 View Tab 3
Ctrl+4 View Tab 4
Ctrl+5 View Tab 5
Ctrl+6 View Tab 6
Ctrl+7 View Tab 7
Ctrl+8 View Tab 8
Ctrl+9 View Tab 9
Ctrl+A Select All
Select All
Ctrl+B New Tab…
Adds a new tab.
Ctrl+C Copy
Copy selection
Ctrl+D Descriptions
Display object descriptions panel.
Ctrl+F Find View…
Find items in the layout.
Ctrl+F6 Stop PC Logging
Stop PC Logging.
Ctrl+G Switch Graph/Grid
Switch between the graph / grid representations of the selected object.
Ctrl+H History
Undo History
Ctrl+K Store Changes in ECU
Programs the checksum in the ECU and causes calibration data to be stored in non-volatile memory (saved on ECU).
Ctrl+L Add Option Full List
Adds a list in which all options in the ECU definition file are shown.
Ctrl+N Calibration Notes
Display / edit calibration notes.
Ctrl+O Open Calibration…
Open a calibration file
Ctrl+P Add Channel List
Adds a list in which individual Channels (measurements) may be selected.
Ctrl+S Save
Save calibration to disk
Ctrl+Shift+0 View Tab Group 10
Ctrl+Shift+1 View Tab Group 1
Ctrl+Shift+2 View Tab Group 2
Ctrl+Shift+3 View Tab Group 3
Ctrl+Shift+4 View Tab Group 4
Ctrl+Shift+5 View Tab Group 5
Ctrl+Shift+6 View Tab Group 6
Ctrl+Shift+7 View Tab Group 7
Ctrl+Shift+8 View Tab Group 8
Ctrl+Shift+9 View Tab Group 9
Ctrl+Shift+L Add Option Selection List
Adds a list in which individual options may be selected.
Ctrl+Shift+Page Down Change View to Next Object
Display the next object in the ECU definition file in the selected view.
Ctrl+Shift+Page Up Change View to Previous Object
Display the previous object in the ECU definition file in the selected view.
Ctrl+Shift+S Save As…
Save calibration under a new name
Ctrl+Shift+Tab Tab Group Popup
Show the tab group popup.
Ctrl+T Live Trim Control
Display the Live Trim Control window (formerly known as 'Virtual PotBox').
Ctrl+V Paste
Paste selection
Ctrl+X Cut
Cut selection
Ctrl+Y Redo
Redo modifications to the Calibration
Ctrl+Z Undo
Undo modifications to the Calibration
Delete Delete
Delete selection
Esc Select None
Select None
F1 Help
Help on using the program.
F11 Toggle full screen mode
Display window full screen.
F4 Toggle Coarse/Fine Edit Mode
Toggle between coarse and fine editing modes.
F6 Start PC Logging
Display and start PC Logging.
F7 Reset Channel Mins/Maxes
Resets channel min/max values.
F8 Toggle Freeze Channels
Freezes channel updates in the view. PC Logging will still run as normal.
F9 Start/Stop Log Playback
Start log playback.
H Hold Mode
Set up channel hold of min/max values.
I Interpolate
INS Insert
L Toggle Follow ECU [Hard]
M Zoom to All
O Options Quick Keys
Options quick access keys.
R Select Row
Select Row
S Zoom to Selection
SHIFT-A Zoom Out (coarse)
SHIFT-Z Zoom In (coarse)
Shift+F1 About the program
Display version and OSS license information.
Shift+F7 Connect
Connect to the ECU.
Shift+F9 Rewind Log Playback
Rewind log playback.
SPACE Select Site at Cursor
U Un-Expand All
V Vertical Expand All
X Interpolate Rows
Y Interpolate Columns
Z Zoom In (fine)

File Menu

  • New Calibration...
    Create a new (blank) calibration
    id: actions/newCalibration
  • Open Calibration...Ctrl+O
    Open a calibration file
    id: actions/openCalibration
  • Open Matching Calibration...
    Open a calibration file that matches the currently open data
    id: actions/openMatchingCalibration
  • Recent Calibrations
    List of recently opened Calibration files
  • SaveCtrl+S
    Save calibration to disk
    id: actions/saveCalibration
  • Save As...Ctrl+Shift+S
    Save calibration under a new name
    id: actions/saveCalibrationAs
  • Save New Version
    Saves the calibration with an incremental version number.
    id: actions/saveCalibrationNewVersion
  • Open Calibration Aspect...
    Open a calibration aspect file (partial calibration)
    id: actions/openAspect
  • Save Calibration Aspect...
    Save a calibration aspect file (partial calibration)
    id: actions/saveAspect
  • Close Calibration
    Close the current calibration file.
    id: actions/closeCalibration
  • Package
    • Create Package...
      Create a package file.
      id: actions/createPackage
    • Create Backup Package...
      Create a backup of all user settings.
      id: actions/createBackupPackage
    • Install Package...
      Install an existing package file (packages can also be drag/dropped).
      id: actions/installPackage
  • Calibration Name...
    Calibration name (edit + settings).
    id: actions/calibrationName
  • Compare Calibration...
    Compare a calibration with the currently open Calibration file / ECU.
    id: actions/compareCalibration
  • Compare Calibration with Defaults...
    Compare a calibration with the defaults for the current ECU
    id: actions/compareCalibrationDefaults
  • Convert...
    Convert a calibration to a different version.
    id: actions/convertCalibration
  • Build Conversion Template...
    Opens the conversion template builder.
    id: actions/editConversionTemplate
  • Reset Cal States to Unchanged
    This will reset the modification state for all options / tables / maps etc to 'Unchanged'. Calibration values themselves are unaffected. This operation cannot be undone.
    id: actions/resetCalStates
  • Exit
    Exit/Quit Application.
    id: actions/exit

Edit Menu

  • UndoCtrl+Z
    Undo modifications to the Calibration
    id: actions/undo
  • RedoCtrl+Y
    Redo modifications to the Calibration
    id: actions/redo
  • HistoryCtrl+H
    Undo History
    id: actions/undoHistory
  • CutCtrl+X
    Cut selection
    id: actions/editCut
  • CopyCtrl+C
    Copy selection
    id: actions/editCopy
  • PasteCtrl+V
    Paste selection
    id: actions/editPaste
  • DeleteDelete
    Delete selection
    id: actions/editDelete
  • Select AllCtrl+A
    Select All
    id: actions/selectAll
  • Select NoneEsc
    Select None
    id: actions/selectNone
  • Select RowR
    Select Row
    id: actions/selectRow
  • Select ColumnC
    Select Column
    id: actions/selectColumn
  • Extended Limits Mode
    Enables Extended Limits mode to set values outside of their normal range.
    id: actions/extendedLimitsMode
  • Find View...Ctrl+F
    Find items in the layout.
    id: actions/find

ECU Menu

  • Connection Setup...
    Setup ECU connection preferences / settings.
    id: actions/setupConnection
  • ConnectShift+F7
    Connect to the ECU.
    id: actions/connect
  • Disconnect
    Disconnect from the ECU.
    id: actions/disconnect
  • Send Calibration to ECU...
    Transfer a new calibration from the PC to the ECU.
    id: actions/sendCalibration
  • Send Current Calibration
    Transfer the currently open calibration from the PC to the ECU.
    id: actions/sendCurrentCalibration
  • Read Calibration
    Transfer all calibration data from the ECU ito the PC.
    id: actions/receiveCalibration
  • Verify Calibration...
    Verify that the calibration data on the PC matches that in the ECU.
    id: actions/verifyCalibration
  • Program Firmware...
    Program new firmware into the ECU.
    id: actions/programFirmware
  • Store Changes in ECUCtrl+K
    Programs the checksum in the ECU and causes calibration data to be stored in non-volatile memory (saved on ECU).
    id: actions/ecuStoreChanges
  • Auto Store
    Enables / Disables Auto Store in the ECU.
    id: actions/autoStore
  • Reset RTC to Current Time
    Reset the ECU Real Time Clock to the current time.
    id: actions/resetRTC
  • Clear Calibration
    Clear the calibration in the ECU.
    id: actions/clearCalibration
  • Live Trim ControlCtrl+T
    Display the Live Trim Control window (formerly known as 'Virtual PotBox').
    id: actions/liveTrimControl
  • ECU Simulator
    The ECU simulator is used for comms protocol emulation.
    id: actions/ecuSimulator
  • Ethernet ECU Simulator
    The Ethernet ECU simulator is used for comms protocol emulation.
    id: actions/ethernetEcuSimulator
  • Security
    • Set Password...
      Set the ECU password to protect the calibration data.
      id: actions/setPassword
    • Clear Password...
      Clears the ECU password - this will also clear any calibration data in the unit unless it was unlocked.
      id: actions/clearPassword
    • Reset Default Password
      Resets the default ECU password. The default password is automatically tried when connecting to the ECU to avoid re-typing it.
      id: actions/resetDefaultPassword
  • Installations...
    Show ECU installations / install an ECU definition file.
    id: actions/installEcu
  • ECU Definition Extensions...
    Import / manage ECU Definition extensions that augment ECU features (e.g. pinouts / wire colours etc).
    id: actions/manageEcudefExtensions
  • ECU Information
    Display ECU information.
    id: actions/ecuInfo
  • Engine History Log...
    Engine History Log Access.
    id: actions/engineHistoryLog
  • Ethernet Diagnostics...
    Inspect the ethernet configuration on this PC and check if any ECU detection broadcasts have been received.
    id: actions/ethernetDiagnostics

Telemetry Menu

  • Serial Telemetry Setup...
    Set up Serial telemetry.
    id: actions/serialTelemetrySetup
  • CAN Telemetry Setup...
    Set up CAN telemetry.
    id: actions/canTelemetrySetup
  • CAN Rx Setup...
    Set up CAN receive on the ECU; Select CAN IDs that the ECU will receive into internal CAN RX channels.
    id: actions/canRxSetup
  • Serial Telemetry Logging / Monitoring...
    Log/monitor serial telemetry stream.
    id: actions/serialTelemetryLogging

Logging Menu

  • ECU Internal Logging Setup...
    Setup ECU internal logging.
    id: actions/setupInternalLogging
  • Read Internal Log...
    Read internal log from the ECU.
    id: actions/receiveInternalLog
  • Process Raw Internal Log...
    Process a raw internal log from the ECU.
    id: actions/processRawLog
  • Export PC Log to STF...
    Export PC log file to STF format for Data Analysis.
    id: actions/exportPcLog
  • PC Logging
    • Configure PC Logging
      Configure and run PC Logging.
      id: actions/pcLogging
    • Start PC LoggingF6
      Display and start PC Logging.
      id: actions/pcLoggingStart
    • Stop PC LoggingCtrl+F6
      Stop PC Logging.
      id: actions/pcLoggingStop
    • Add Marker to PC LogAlt+F6
      Add a marker to PC Logging if it is running.
      id: actions/pcLoggingAddMarker
  • Log Playback
    • Log Playback
      Display log playback transport controls.
      id: actions/playbackLog
    • Start/Stop Log PlaybackF9
      Start log playback.
      id: actions/playbackLogStartStop
    • Rewind Log PlaybackShift+F9
      Rewind log playback.
      id: actions/playbackLogRewind

View Menu

  • Options
    • Add Option Full ListCtrl+L
      Adds a list in which all options in the ECU definition file are shown.
      id: actions/addOptionsFull
    • Add Option Selection ListCtrl+Shift+L
      Adds a list in which individual options may be selected.
      id: actions/addOptions
  • Channels
    • Add Channel ListCtrl+P
      Adds a list in which individual Channels (measurements) may be selected.
      id: actions/addChannelList
    • Add Bar Gauge...
      Adds a view for displaying Channels (measurements) as a bar graph.
      id: actions/addBarGauge
    • Add Number Gauge...
      Adds a view for displaying Channels (measurements) as a number.
      id: actions/addNumberGauge
    • Add Scope...
      Adds a view for displaying Channels (measurements) as a time-series plot.
      id: actions/addScope
    • Add Tacho...
      Adds a view for displaying Channels (measurements) as a rotary tachometer.
      id: actions/addTacho
  • Tables
    Lists all Tables defined for the ECU
    • Add Table Graph...
      Add a Table graph view to the current tab.
      id: actions/addTableGraph
    • Add Table Grid...
      Add a Table grid view to the current tab.
      id: actions/addTableGrid
  • Channel Tables
    • Add Channel Table Graph...
      Add a Channel Table graph view to the current tab.
      id: actions/addChannelTableGraph
    • Add Channel Table Grid...
      Add a Channel Table grid view to the current tab.
      id: actions/addChannelTableGrid
  • Maps
    Lists all Maps defined for the ECU
    • Add Map Graph...
      Add a Map graph view to the current tab.
      id: actions/addMapGraph
    • Add Map Grid...
      Add a Map grid view to the current tab.
      id: actions/addMapGrid
    • Add Map Slice...
      Add a Map slice view to the current tab.
      id: actions/addMapSlice
    • Add Map Site Target...
      Add a Map site target view to the current tab. The site target shows the fractional position of the map input channels to the center of a map site.
      id: actions/addMapSiteTarget
  • Log Maps (Automapping)
    • Add Log Map Controller...
      Adds a Controller view for log mapping to adjust algorithm parameters and to enable map modifications.
      id: actions/addLogMapController
    • Add Log Map Graph...
      Adds a Log Map graph view. Log maps store channel values read from the ECU against 2 other channels.
      id: actions/addLogMapGraph
    • Add Log Map Grid...
      Adds a Log Map grid view. Log maps store channel values read from the ECU against 2 other channels.
      id: actions/addLogMapGrid
    • Add Log Map Slice...
      Adds a Log Map slice view. Log maps store channel values read from the ECU against 2 other channels.
      id: actions/addLogMapSlice
    • Add Log Map Site Target...
      Adds a Log Map site target view. The site target shows the fractional position of the map input channels to the center of a map site.
      id: actions/addLogMapSiteTarget
    • Add Log Map Target Graph...
      Adds a Log Map Target Graph view. The log map target defines the target value for the mapped channel (e.g. Lambda when automapping Fuel).
      id: actions/addLogMapTargetGraph
    • Add Log Map Target Grid...
      Adds a Log Map Target Grid view. The log map target defines the target value for the mapped channel (e.g. Lambda when automapping Fuel).
      id: actions/addLogMapTargetGrid
    • Add Log Map Target Slice...
      Adds a Log Map Target Slice view. The log map target defines the target value for the mapped channel (e.g. Lambda when automapping Fuel).
      id: actions/addLogMapTargetSlice
  • User Objects
    • Manage User Objects...
      Manage user objects.
      id: actions/manageUserObjects
    • Create Function Object...
      Create a scripted view of e.g. a map or table.
      id: actions/createFunctionObject
    • Create User Log Map...
      Resets the layout of windows docked to the edges of the frame.
      id: actions/createUserLogMap
  • Other
    • Add Aspect Selector
      Adds an Aspect Selector view. Aspect Selectors allow selection of partial calibrations from a simple drop-down box.
      id: actions/addAspectSelector
    • Add Audit View
      Adds an Audit view. Audit views are a node based diagram that indicates data flow within the ECU.
      id: actions/addAuditView
    • Add Button...
      Adds a button control. Buttons can be configured through scripting to perform complex actions.
      id: actions/addButton
    • Add CAN Telemetry...
      Adds CAN Telemetry configuration view.
      id: actions/addCanTelemetryView
    • Add CAN Rx...
      Adds ECU CAN Receive view.
      id: actions/addCanRxView
    • Add Check Box...
      Adds a checkbox control. Checkboxes can be configured through scripting to link to ECU objects and perform complex actions.
      id: actions/addCheckBox
    • Add ComboBox...
      Adds a ComboBox control, requires scripting.
      id: actions/addComboBox
    • Add Dial...
      Adds a rotary dial control. Dials can be linked to objects and additionally may be scripted.
      id: actions/addDial
    • Add GridView...
      Adds a GridView control, requires scripting.
      id: actions/addGridView
    • Add Group...
      Adds a group view. Groups can be used to group together other views into a dashboard / user interface (UI) form.
      id: actions/addGroup
    • Add Image...
      Adds a view for displaying static images such as JPEG or PNG.
      id: actions/addImage
    • Add Label...
      Adds a label control. Labels can display static text. They can also scripted to link to ECU objects or calculation results.
      id: actions/addLabel
    • Add Notes...
      Add a Notes view to the current tab. Notes allow some text to be added for additional explanations on a tab.
      id: actions/addNotes
    • Add Number Edit...
      Adds a number edit control. Number edits can be configured through scripting to link to ECU objects perform complex actions.
      id: actions/addNumberEdit
    • Add Option Editor...
      Adds an editor for a single Option.
      id: actions/addOptionEditor
    • Add Pinout View...
      Adds a view for showing the physical ECU connector pinout.
      id: actions/addPinoutView
    • Add Radio Button...
      Adds a radio button control. Radio buttons can be configured through scripting to link to ECU objects and perform complex actions.
      id: actions/addRadioButton
    • Add Sequencer...
      Adds a sequencer view. Sequencers can be used to perform a list of actions with control flow, display pop-up windows etc. Can be useful for production testing, for example.
      id: actions/addSequencer
    • Add Signal Generator...
      Adds a Signal Generator view. Signal generators can be used to generate arbitrary waveforms via a channel / option or via a PC sound card and can be used to simulate crank wheels for example.
      id: actions/addSigGen
    • Add Toggle Button...
      Adds a toggle button control. Toggle buttons can be configured through scripting to link to ECU objects and perform complex actions.
      id: actions/addToggleButton
    • Add Wizard List View...
      Adds a wizard list view that holds multiple sub-pages.
      id: actions/addWizardListView
    • Add Wizard View...
      Adds a wizard view.
      id: actions/addWizardView
  • Configure Outputs
    Configure ECU outputs.
    id: actions/configureOutputs
  • Change View to Previous ObjectCtrl+Shift+Page Up
    Display the previous object in the ECU definition file in the selected view.
    id: actions/prevObject
  • Change View to Next ObjectCtrl+Shift+Page Down
    Display the next object in the ECU definition file in the selected view.
    id: actions/nextObject
  • Switch Graph/GridCtrl+G
    Switch between the graph / grid representations of the selected object.
    id: actions/switchGraphGrid
  • View ExplorerAlt+F7
    Display \"View Explorer\" panel.
    id: actions/viewSelector
  • PropertiesAlt+Enter
    Display the properties panel.
    id: actions/viewProperties
  • ECU Status
    Display the ECU status window.
    id: actions/ecuStatus
  • Comms Monitor
    View a trace of data exchange to/from the ECU.
    id: actions/commsMonitor
  • Calibration Checker
    Checks values in the calibration against known valid ranges.
    id: actions/calibrationChecker
  • Calibration NotesCtrl+N
    Display / edit calibration notes.
    id: actions/calibrationNotes
  • DescriptionsCtrl+D
    Display object descriptions panel.
    id: actions/descriptions

Wizards Menu

  • Manage Wizards...
    Manage wizards.
    id: actions/wizardsManage

Tools Menu

  • Toggle Freeze ChannelsF8
    Freezes channel updates in the view. PC Logging will still run as normal.
    id: actions/toggleFreeze
  • Reset Channel Mins/MaxesF7
    Resets channel min/max values.
    id: actions/resetChannelMinMax
  • Hold ModeH
    Set up channel hold of min/max values.
    id: actions/holdMode
  • Maths Quick KeysM
    Maths quick access keys.
    id: actions/mathsQuickKeys
  • Options Quick KeysO
    Options quick access keys.
    id: actions/optionsQuickKeys
  • Selection Quick KeysS
    Selection quick access keys.
    id: actions/selectionQuickKeys
  • Toggle Coarse/Fine Edit ModeF4
    Toggle between coarse and fine editing modes.
    id: actions/toggleCoarseEdit

Layout Menu

  • Layout Hierarchy...
    Configure tabs and view windows using a tree that represents the layout hierarchy..
    id: actions/layoutHierarchy
  • New Tab...Ctrl+B
    Adds a new tab.
    id: actions/newTab
  • New Nested Tab...
    Adds a new page of vertical tabs.
    id: actions/newNestedTab
  • Open Layout...
    Load layout file (tabs).
    id: actions/openLayout
  • Save Layout...
    Save the current layout (tabs).
    id: actions/saveLayout
  • Layout File Buttons
    • Configure Layout File Buttons...
      Configure toolbar buttons for loading tab files.
      id: actions/layoutFileButtons
  • Working Layout
    • Save Working Layout Now
      Makes this layout be shown next time the program is opened
      id: actions/saveWorkingLayout
    • Autosave: Ask If Changed
      If the layout is being closed, this setting will pop up a box to confirm if you want to save the working layout.
      id: actions/autoSaveLayoutAlwaysAsk
    • Autosave: Always Save
      If enabled, the working layout will always be automatically saved before being closed.
      id: actions/autoSaveLayoutAlwaysSave
    • Autosave: Always Discard
      If enabled, the working layout will not be saved before being closed.
      id: actions/autoSaveLayoutAlwaysDiscard
    • Revert to Last Working Layout
      Revert the to the last saved working layout
      id: actions/revertToLastWorkingLayout
    • Delete Working Layout
      Delete the last viewed tabs (use if you have a problem).
      id: actions/deleteWorkingLayout
  • Import GWv3 Templates...
    Imports a GWv3 templates into new tabs.
    id: actions/importV3Templates
  • Clear Layout
    Close all of the tabs / views in the layout.
    id: actions/layoutClear
  • Lock Layout (All Tabs)Alt+Ctrl+L
    Locks the window layout of all tabs.
    id: actions/lock
  • Reset Workspace
    Resets the layout of windows docked to the edges of the frame.
    id: actions/viewReset
  • Toggle full screen modeF11
    Display window full screen.
    id: actions/fullscreen
  • Fullscreen Options
    • Status Bar
      Display status bar in full screen mode.
      id: actions/fullscreenStatusBar
    • Menu Bar
      Display menu bar in full screen mode.
      id: actions/fullscreenMenuBar
    • Tool Bar
      Display tool bar in full screen mode.
      id: actions/fullscreenToolBar
    • Docked Windows
      Display docked windows in full screen mode.
      id: actions/fullscreenDockedWindows
  • Previous Tab Group
    Set the tab group to the previous group.
    id: actions/prevTabGroup
  • Next Tab Group
    Set the tab group to the next group.
    id: actions/nextTabGroup
  • Tab Group PopupCtrl+Shift+Tab
    Show the tab group popup.
    id: actions/tabGroupPopup
  • View Tab Group
    • View Tab Group 1Ctrl+Shift+1
    • View Tab Group 2Ctrl+Shift+2
    • View Tab Group 3Ctrl+Shift+3
    • View Tab Group 4Ctrl+Shift+4
    • View Tab Group 5Ctrl+Shift+5
    • View Tab Group 6Ctrl+Shift+6
    • View Tab Group 7Ctrl+Shift+7
    • View Tab Group 8Ctrl+Shift+8
    • View Tab Group 9Ctrl+Shift+9
    • View Tab Group 10Ctrl+Shift+0
  • View Tab
    • View Tab 1Ctrl+1
    • View Tab 2Ctrl+2
    • View Tab 3Ctrl+3
    • View Tab 4Ctrl+4
    • View Tab 5Ctrl+5
    • View Tab 6Ctrl+6
    • View Tab 7Ctrl+7
    • View Tab 8Ctrl+8
    • View Tab 9Ctrl+9
    • View Tab 10Ctrl+0

Configure Menu

  • Preferences...Alt+F7
    Application preferences / settings.
    id: actions/preferences
  • Toggle Dark Theme
    Enable / disable dark user interface theme.
    id: actions/darkMode
  • Keyboard Shortcuts...
    Configure keyboard shortcuts.
    id: actions/actions
  • Key Mode Configuration...
    Configure Key Mode shortcuts.
    id: actions/keymode
  • Toggle Key Mode Enable
    Enable/disable Key Mode shortcuts.
    id: actions/keymodeEnable
  • Units / Scaling...
    Configure units and scaling.
    id: actions/units
  • PotBox...
    Configure potbox(es).
    id: actions/potBox
  • Linked Controllers...
    Manage linked controllers.
    id: actions/linkedControllers
  • License...
    Manage software license.
    id: actions/license
  • Dongle
    • Detect
      Detect if a dongle is attached.
      id: actions/detectDongle
    • Update
      Update dongle over the telephone.
      id: actions/updateDongle
  • Import GWv3 Settings...
    Import GWv3 Setup.
    id: actions/importV3Setup
  • Program Serial...
    Program ECU serial number.
    id: actions/programSerial

Help Menu

  • HelpF1
    Help on using the program.
    id: actions/help
  • About the programShift+F1
    Display version and OSS license information.
    id: actions/about
  • Safety Warning...
    Display safety warning normally shown when connecting to an ECU for the first time.
    id: actions/safetyWarning
  • Start Page
    Display the Start Page.
    id: actions/startPage
  • Diagnostics...
    Display diagnostics window.
    id: actions/helpDiagnostics
  • Check for Update
    Check if an update to the application is available via the internet.
    id: actions/checkForUpdate
  • Update: Use Beta Channel
    Check for application updates in the beta channel. Beta releases may not be stable.
    id: actions/updateUseBetaChannel

Context Menu

  • Absolute Change...Ctrl-Shift-A
    id: actions/context/absoluteChange
  • Apply Correction(s)
    id: actions/context/applyCorrections
  • Close Log
    id: actions/context/closeLog
  • Default
    id: actions/context/colourModeDefault
  • Gradient
    id: actions/context/colourModeGradient
  • None
    id: actions/context/colourModeNone
  • State
    id: actions/context/colourModeState
  • State And Gradient
    id: actions/context/colourModeStateAndGradient
  • State Text
    id: actions/context/colourModeStateText
  • Configure
    id: actions/context/configure
  • Configure Trails...
    id: actions/context/configureTrails
  • Copy Fill...
    id: actions/context/copyFill
  • Compare With Defaults
    id: actions/context/defaultsCompare
  • Reset to Defaults
    id: actions/context/defaultsReset
  • Edit Colour Palette
    id: actions/context/editPalette
  • Sparse Fill...
    id: actions/context/fill
  • Float / Un-float Window
    id: actions/context/floatWindow
  • Toggle Follow ECU [Hard]L
    id: actions/context/followHard
  • Toggle Follow ECU [Soft]
    id: actions/context/followSoft
  • Change Injectors/Pressure
    id: actions/context/fuel/changeInjectors
  • Optimize Fuel Map
    id: actions/context/fuel/optimize
  • Rescale Fuel Map
    id: actions/context/fuel/rescale
  • Un-Optimize Fuel Map
    id: actions/context/fuel/unoptimize
  • View duty cycle
    id: actions/context/fuel/viewDutyCycle
  • View pulse width
    id: actions/context/fuel/viewPulseWidth
  • View default
    id: actions/context/fuel/viewRaw
  • FunctionCtrl-F
    id: actions/context/function
  • Import Log
    id: actions/context/importLog
  • InsertINS
    id: actions/context/insert
  • InterpolateI
    id: actions/context/interpolate
  • Interpolate ColumnsY
    id: actions/context/interpolateCols
  • Interpolate RowsX
    id: actions/context/interpolateRows
  • Toggle View Lock
    id: actions/context/lockGrid
  • Show Menu on Maps/Tables
    id: actions/context/maptableMenu
  • Percent Change...Ctrl-Shift-P
    id: actions/context/percentChange
  • Rename...Ctrl-R
    id: actions/context/rename
  • Reset TrailsAlt-T
    id: actions/context/resetTrails
  • Toggle Rotation Mode...
    id: actions/context/rotationMode
  • Take Screen Shot
    id: actions/context/screenshot
  • Select Site at CursorSPACE
    id: actions/context/selectSiteAtCursor
  • Select 'Calculated' sites
    id: actions/context/selectStateCalculated
  • Select 'Calibrated' sites
    id: actions/context/selectStateCalibrated
  • Select 'Changed' sites
    id: actions/context/selectStateChanged
  • Select 'Optimized' sites
    id: actions/context/selectStateOptimized
  • Select 'Pasted' sites
    id: actions/context/selectStatePasted
  • Select 'Unchanged' sites
    id: actions/context/selectStateUnchanged
  • Limits...Alt-L
    id: actions/context/setLimits
  • Set State to Calculated
    id: actions/context/setStateCalculated
  • Set State to Calibrated
    id: actions/context/setStateCalibrated
  • Set State to Changed
    id: actions/context/setStateChanged
  • Set State to Optimized
    id: actions/context/setStateOptimized
  • Set State to Pasted
    id: actions/context/setStatePasted
  • Set State to Unchanged
    id: actions/context/setStateUnchanged
  • Show Raw ValuesCtrl-Shift-R
    id: actions/context/showRawValues
  • Toggle Lock on Selected Sites
    id: actions/context/siteLock
  • Unlock all sitesU
    id: actions/context/siteUnlock
  • Smooth...Alt-S
    id: actions/context/smooth
  • Sort Ascending
    id: actions/context/sortAscending
  • Sort Descending
    id: actions/context/sortDescending
  • Sort None
    id: actions/context/sortNone
  • Vertical Expand AllV
    id: actions/context/verticalExpandAll
  • Un-Expand AllU
    id: actions/context/verticalUnExpandAll
  • Zoom In (coarse)SHIFT-Z
    id: actions/context/zoomInCoarse
  • Zoom In (fine)Z
    id: actions/context/zoomInFine
  • Zoom Out (coarse)SHIFT-A
    id: actions/context/zoomOutCoarse
  • Zoom Out (fine)A
    id: actions/context/zoomOutFine
  • Zoom to AllM
    id: actions/context/zoomToAll
  • Zoom to Main Layer\tM
    id: actions/context/zoomToMainLayer
  • Zoom to SelectionS
    id: actions/context/zoomToSelection