VALIDRANGE

Supported by Ginmake 1.24 and later, Gin file version 3.21.

This sets up its preceding object with a range of valid values. This will be used by GW in doing a sanity check on a given calibration and note possible problems.

e.g.

1// [Rad Fan 1,,OL3,,o,2,i,,]
2// [VALIDRANGE,1,255]

In this example, it suggests that Rad Fan should be in the range 1…255.

The minimum or maximum may be omitted if there’s no limit:

// [VALIDRANGE,1,]

Values are RAW unscaled values.

Type specifiers may be used. Useful if the value cannot be reasonably represented using a 32bit signed integer.

To specify VALIDRANGE in physical (scaled) values, use HARDLIMITS.

In GW 4.03.12+ this is more strongly enforced when setting values and is somewhat equivalent to EXTENDED_LIMITS in A2L files, though not a 1:1 mapping.

For A2L output, VALIDRANGE is exported as EXTENDED_LIMITS on calibration objects, in the same way as HARDLIMITS, but with raw bounds converted to physical values (except for enumerations). A2L does not support EXTENDED_LIMITS on MEASUREMENT objects.