Image Selectors Tab

Overview

The Image Selectors Tab provides configuration of images that can change in response to an input value channel.

Image Selectors Tab Image Selectors Tab

Input Channel

The Input Channel is used to select images from the table; its value is looked up against the Channel Value column in the table.

Self Test Duration

When the display starts, the Self Test Icon will be displayed for the specified duration, in seconds, unless set to zero.

Number of Graphics

The Number of Graphics selection count is the number of images used in the image selector and is at least two. The first image is shown by default. Subsequent images are shown according to the settings in the table.

Table Columns

Index

The number of the selection bitmap for which the following settings are made. For example, if the selection count is set to 3, 1 will specify the first selectable bitmap and 2 will specify the second selectable bitmap.

Value

When the Input Channel is equal to this value, this image is shown instead of the default image.

If checked, this image will blink according to the On Time and Off Time in seconds. The image swaps between the indexed image and the default image.

Enable Max Duration

If checked, the image is only be shown for the specified duration no matter how long the input is equal to the value.