Connector And Pinout
The CD6 has a single 41-way Autosport Double Density connector. This pinout comes from GEMS Technical Specification 105497, Revision 3.
Warning
Before wiring, confirm that Revision 3 applies to your unit.
Connector
| ID | Unit connector | Loom (mating) connector |
|---|---|---|
| 1 | AS-DD212-41PN-975A | AS-DD612-41SN |
Pins By Function
| Function | Pins |
|---|---|
| +12 V power supply | 1, 2 |
| Ground | 41 |
| USB | 3-6 |
| CAN1 | 7, 8 |
| CAN2 | 9, 10 |
| Beacon | 11 |
| Serial (5 V level) | 12, 13 |
| 5 V sensor supply and analogue ground | 14, 15 |
| Analogue inputs 1-7 | 16-22 |
| Low-side drivers 1-4 | 23, 28, 29, 30 |
| Ethernet | 24-27 |
| Speed inputs 1-4 | 31-34 |
| Buttons 1-2 | 35, 36 |
| Video (camera) inputs | 37-40 |
Pinout
| Pin | Signal | Notes |
|---|---|---|
| 1 | +12V | 12 V power supply |
| 2 | +12V | 12 V power supply |
| 3 | USB DM | USB data - |
| 4 | USB DP | USB data + |
| 5 | USB VBUS | |
| 6 | USB GND | |
| 7 | CAN1 H | |
| 8 | CAN1 L | |
| 9 | CAN2 H | |
| 10 | CAN2 L | |
| 11 | Beacon | Active low |
| 12 | Serial Rx | 5 V level |
| 13 | Serial Tx | 5 V level |
| 14 | 5V | Sensor supply |
| 15 | Analogue ground | |
| 16 | Analogue 1 | |
| 17 | Analogue 2 | |
| 18 | Analogue 3 | |
| 19 | Analogue 4 | |
| 20 | Analogue 5 | |
| 21 | Analogue 6 | |
| 22 | Analogue 7 | |
| 23 | Low-side driver 1 | |
| 24 | Ethernet RXP | |
| 25 | Ethernet RXN | |
| 26 | Ethernet TXP | |
| 27 | Ethernet TXN | |
| 28 | Low-side driver 2 | |
| 29 | Low-side driver 3 | |
| 30 | Low-side driver 4 | |
| 31 | Speed input 1 | |
| 32 | Speed input 2 | |
| 33 | Speed input 3 | |
| 34 | Speed input 4 | |
| 35 | Button 1 | |
| 36 | Button 2 | |
| 37 | Video2 In+ | |
| 38 | Video2 In- | |
| 39 | Video1 In+ | |
| 40 | Video1 In- | |
| 41 | GND |