https://gems.co.uk/views/pinout.html The Pinout view displays ECU pinout information in a table with a connector diagram. For how to add objects see the Adding an Object section. The table and diagram are linked: Selecting pins in the table highlights those pins in the connector diagram. Clicking pins in the connector diagram selects the corresponding row in the table. Quick start Add a Pinout view to your layout. Confirm the ECU has loaded EDX files with pinout data. Click a pin in the diagram or select a row in the grid. Check Used By, Internal Pin(s) and PU / PD to verify routing and pull resistor setup. If needed, right-click the view and use the ECU definition extension management actions. Grid columns Pin External connector pin ID (for example RA1, RB1). This comes from the pin id value in the pinout definition. Hugo en-us