Text Message Gauge
Overview
The Text Message Gauge is used to display messages received from a GEMS radio messaging system or GEMS SMS1 text messaging system.
In addition to Standard Gauge Properties , the following properties may be configured:
| Property | Description |
|---|---|
| Show Urgent Messages Only | In this mode, the gauge is normally hidden but will display over all other gauges when an urgent message is received. The gauge will be hidden again in response to a TEXT HIDE URGENT PANEL event. |
| Show Newest Message On Top | If checked, new messages will be shown at the top of the list and the list will scroll down as necessary. If not checked, then new messages will be added to the bottom of the list and the list will scroll up as necessary. |
| Show Newest Message in Large Font | If Checked, the newest message will be shown in the large font and all older messages will be shown in the small font. Font size selected in GEMS RMS will be ignored. If not checked, then the messages will be shown in the size specified by GEMS RMS. |
| Small Font / Large Font | Set the font used to display small and large text messages. Note that the SMS1 only transmits small messages - in this case, the Large Font properties are irrelevant. |
Display Support
| Display | Supported? |
|---|---|
| CD34 | Yes |
| LDS4 | Yes |
| CD32 | Yes |
| LDS35 | No |
| LDS35_L | No |
| CD6-43 | Yes |
| GLW-43 | Yes |