<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
  <channel>
    <title>Internal and Diagnostic Channels :: GEMS Dash Design (GDD)</title>
    <link>https://gems.co.uk/channels-tab/predefined-channels/internal-channels/index.html</link>
    <description>Overview Depending upon the display type and firmware version, additional predefined channels provide information from inside the Display Module. The available channels and their names vary between display types; check the predefined channels in your setup (see Channels Tab ).&#xA;Category Examples Description Internal supplies and temperatures Internal 1V8, Internal 3V3, Internal 5V0, Supply Volts, Internal Temperature, CPU Temperature Internal voltage rails, the supply voltage and internal temperatures, scaled in physical units. Sensors Ambient Light Sensor, Sensor Supply 5V Built-in sensors and the sensor supply voltage, where fitted. Inertial measurement Accel X/Y/Z, Gyro X/Y/Z Accelerometer and gyroscope readings, where fitted. Buttons Button 1, Button L1, Paddle L, Button SWT1 The state of buttons on the display or steering wheel. Buttons may also be used to trigger events; see Events Tab . Marshalling LEDs Marshall Amber L, Marshall LED Logic Red R The state of the marshalling LEDs. Diagnostics Millisecond Counter Timing diagnostics, where supported by the display firmware. Channels that require a particular firmware version are checked when programming the display; see Uploading a Setup to a Display .</description>
    <generator>Hugo</generator>
    <language>en-us</language>
    <atom:link href="https://gems.co.uk/channels-tab/predefined-channels/internal-channels/index.xml" rel="self" type="application/rss+xml" />
  </channel>
</rss>