<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
  <channel>
    <title>CD6 Hardware :: CD6 Manual</title>
    <link>/hardware/index.html</link>
    <description>The CD6 is a configurable driver dash-display with a high-brightness, LED-backlit IPS TFT. It comes in two sizes:&#xA;Model Display diagonal CD6-43 4.3 inch CD6-50 5.0 inch The hardware pages summarise GEMS Technical Specification 105497, Revision 3. Before wiring, confirm that this revision applies to your unit.&#xA;Specifications: display, inputs, outputs, communications, logging and mechanical data. Connector And Pinout: the 41-way connector, its mating part and the function of every pin. Configuration And Models&#xD;Configure inputs, CAN, screens, logging and outputs with GEMS Dash Design. See Configuring with Dash Design. A custom model does not drive this hardware directly. It works through dash channels and the functions listed in What a Model Can Access.</description>
    <generator>Hugo</generator>
    <language>en-gb</language>
    <atom:link href="/hardware/index.xml" rel="self" type="application/rss+xml" />
    <item>
      <title>Specifications</title>
      <link>/hardware/specifications.html</link>
      <pubDate>Mon, 01 Jan 0001 00:00:00 +0000</pubDate>
      <guid>/hardware/specifications.html</guid>
      <description>These values come from GEMS Technical Specification 105497, Revision 3. Items the specification lists as TBD or TBC are not yet defined. Do not infer them from another GEMS product.&#xA;Power&#xD;Parameter Value Operating voltage 7 V to 18 V Power consumption at 12 V TBD Display&#xD;Parameter Value Type IPS TFT, LED backlit, with anti-glare filter Resolution 800 x 480 pixels, true colour Size (diagonal) 4.3 inch (CD6-43) or 5.0 inch (CD6-50) Brightness 800 cd/m² Contrast ratio 1000:1 External Inputs&#xD;Input Count Details Analogue 7 0-5 V, 12-bit Speed 4 Hall-effect type Camera 2 SDTV CVBS composite, PAL or NTSC Button 2 Active low Beacon 1 Pull to ground to trigger Ambient light sensor 1 Internal Sensing&#xD;Measurement Count Supply voltage 1 Internal supply monitoring 4 Internal temperature 1 Processor temperature 1 Real-time clock (RTC) 1 Inertial measurement unit (G-sensor) 1, six-axis Outputs&#xD;Output Count Low-side drivers 4 Tri-colour LEDs 10 5 V sensor supply 1 Revision 3 does not specify current ratings for the low-side drivers or the sensor supply.</description>
    </item>
    <item>
      <title>Connector And Pinout</title>
      <link>/hardware/connector-pinout.html</link>
      <pubDate>Mon, 01 Jan 0001 00:00:00 +0000</pubDate>
      <guid>/hardware/connector-pinout.html</guid>
      <description>The CD6 has a single 41-way Autosport Double Density connector. This pinout comes from GEMS Technical Specification 105497, Revision 3.&#xA;Warning&#xD;Before wiring, confirm that Revision 3 applies to your unit.&#xA;Connector&#xD;ID Unit connector Loom (mating) connector 1 AS-DD212-41PN-975A AS-DD612-41SN Pins By Function&#xD;Function Pins +12 V power supply 1, 2 Ground 41 USB 3-6 CAN1 7, 8 CAN2 9, 10 Beacon 11 Serial (5 V level) 12, 13 5 V sensor supply and analogue ground 14, 15 Analogue inputs 1-7 16-22 Low-side drivers 1-4 23, 28, 29, 30 Ethernet 24-27 Speed inputs 1-4 31-34 Buttons 1-2 35, 36 Video (camera) inputs 37-40 Pinout&#xD;Pin Signal Notes 1 +12V 12 V power supply 2 +12V 12 V power supply 3 USB DM USB data - 4 USB DP USB data + 5 USB VBUS 6 USB GND 7 CAN1 H 8 CAN1 L 9 CAN2 H 10 CAN2 L 11 Beacon Active low 12 Serial Rx 5 V level 13 Serial Tx 5 V level 14 5V Sensor supply 15 Analogue ground 16 Analogue 1 17 Analogue 2 18 Analogue 3 19 Analogue 4 20 Analogue 5 21 Analogue 6 22 Analogue 7 23 Low-side driver 1 24 Ethernet RXP 25 Ethernet RXN 26 Ethernet TXP 27 Ethernet TXN 28 Low-side driver 2 29 Low-side driver 3 30 Low-side driver 4 31 Speed input 1 32 Speed input 2 33 Speed input 3 34 Speed input 4 35 Button 1 36 Button 2 37 Video2 In+ 38 Video2 In- 39 Video1 In+ 40 Video1 In- 41 GND</description>
    </item>
  </channel>
</rss>